Fast Charging Mobile App


Fast Charging Mobile App

Ampere

Introduction:

You are searching for Fast Charging Mobile App? Ampere Measure your mobile battery current during charging and discharging. By using this application, you can find that your mobile Charger or USB cable charges your device really fast or not? With the help of this app, you can prove this. Ampere app measure the charging and discharging current of your mobile battery during the charging by a charger.

Amazing Fearures:

  • Widgets
  • Notification
  • Alerts on device
  • Alerts on Android Wear

Important Note:

Ampere is not supported every device because there are many devices which lacks an appropriate measurement chip or function or the interface and they can not be supported at all mobile devicea. Please you should read the list of not supported phones at given below paragraph.The ampere app is not to measure the current of your mobile battery accurately. It is only good for you to evaluate which Charger or USB cable combination is working the best on the same device.

How to Use:

Click on the Ampere app icon and wait for 10 seconds (“measuring” is showing on the display). After 10 seconds or less, the charging or discharging current will be shown in mili amperes.

The Measuring Current Deponds on Many Things:

  • Charger (USB/AC/Wireless)
  • USB cable
  • Phone type
  • Current tasks running
  • Display brightness
  • WiFi state
  • GPS state

Please note that don’t use the readings on this app as 100% accurate. However, the readings are showing good enough to measure how different chargers and USB cables are better on the same device.

Background info:

The Ampere app measures the charging and discharging current of the battery. If your phone is not connected to a charger, you can see the discharging current which is negative. If your mobile device connected to a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.If your mobile phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).

Technical info:

The displayed current showing on the app is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every mobile phone company uses different battery types and other hardware making it difficult to get accurate results about your mobile charger.

Please note that some LiPo batteries don’t draw the maximum for the full time it takes to charge the phone. If your mobile battery is charged almost full then the charging current will be much less as by lower battery levels.

Mobile Phones that are not Supported:

Under Mentioned mobile phones are not supported by the Ampere App:-

✓ Galaxy Grand Prime – fortuna3gdtv

✓ Galaxy Note2 – t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos

✓ Galaxy S3 – d2att, d2spr, d2vmu

✓ Galaxy Tab4 7.0 – degas3g

✓ HTC Desire 510 – htc_a11ul8x26

✓ HTC One S (ville), X (endeavoru), XL (evita)

✓ HTC Sensation 4G – pyramid

App Info:

Latest version4.08
Ratings3+
Downloads10M+
App size8.32 MB
Required OSAndroid 4.4 & up
OwnerBrain_Trapp

Conclusion:

As you was searching for The Fast Charging Mobile App, The Ampere is a great and useful app to measuring your mobile charging current during charging and also during discharging. With the gelp of the app, you can find easily best and fast charger for your mobile device. It also helps to recognize best and fast USB cable and mobile chargers.

Download Link:

https://play.google.com/store/apps/details?id=com.gombosdev.ampere

Leave a comment